BRAND | Bieler Lang |
Product | GMC ECOLINE 8304 |
Description | Gas Warning Center |
Internal code | IMP291132 |
Weight | 1 |
Technical specification | Collecting Alarm: Pre-Alarm, Main Alarm, Horn, Disturbance Single alarm 1:4 x pre-alarm single alarms Single alarm 2:4 x single alarms main alarm The main alarm is stored, the pre-alarm can optionally be equipped with this function. The alarms are set to the following thresholds: Pre-alarm: 10% LEG Main alarm: 20% LEG The alarm thresholds can be assigned a switch-on delay of 30 seconds. This is done by Flashing of the corresponding alarm LED until the time has elapsed. Technical data: Connectable probes: 1 - 4 Sensor input: 4 x 4-20mA Outputs: potential-free changeover contacts (230VAC, 4A), photomosrelay (32VDC, 200mA) Alarm device: built-in buzzer 85dBA Display: Indicator for concentration and channel number LED for alarm 1, 2, fault, ready, measurement, horn Power supply: 100 - 240VAC, 47 - 63Hz, 20W Emergency power: 1 x 24VDC emergency power input Temperature range ፦10°C to +40°C Humidity: 10 - 95% RH (non-condensing) Degree of protection: IP 44 Weight: 1300g Casing: plastic wall housing Dimensions WxHxD: 240x190x90mm Functional report: EN 50194 Electrical safety: EN 60335-1 EMC requirements: EN 50270 (type 1), EN 61000-6-3 |
Please Contact Us to Order to offer competitive prices and delivery time for Bieler Lang - GMC ECOLINE 8304 Gas Warning Center number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Korea Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Gas Alarm
Gas measurement computer
ExDetector
SENSOR,GAS
Gas warning device
gasmesscomputer
Gasmeßfühler
gas sensor
ExDetector
gas sensor
Gas sensor type: ExDetector
gas measurement computer
Gasmesscomputer
Gasmeßfühler
Front probe with sensor
Gas sensor
gas sensor
Gas detector
Gas Measurement Computer
Meßfühler-Typ: Gasmonitor O2
Gas measuring computer
(EC-type examination certificate BVS 03 ATEX G 007 X, PFG-No. 41300503P SIL-1 capable microprocessor technology Fault monitoring for wire breakage, power failure Short circuit and computer defect Cyclical, digital display of the current Concentration of each measuring point Alarm test without test gas Reset the horn and alarm 2 Alarm thresholds: 2 Connectable probe: 2 Design: wall mounting or standard mounting box LEDs for: Alarm 1 and 2, malfunction, sensor 1+ 2 Horn, operating Relay output for: Alarm 1 and 2 for both sensors Horn and fault Alarm 1 non-latching Alarm 2: optionally storing Supply voltage: 230V AC or 24V DC)
Detector