| BRAND | ProMinent |
| Product | S3CBH040830PVTS130UA01000EN |
| Description | motor dosing pump |
| Internal code | IMP4975556 |
| Custom code | 84135040 |
| Technical specification | Material S3CB Sigma 3 control type B The Sigma/ 3 control type motor dosing pump is a very robust motor diaphragm dosing pump and ensures with its patented Multi-layer safety membrane for a high level of process reliability. Membrane rupture is standard with an optical Membrane rupture indicator shown, but can be used as a selected option be equipped with signaling via contact. The Sigma control type series is an intelligent pump with a 1pH wide-range power supply, 100-230 volts, 50/60Hz for safe use in many applications and offers a Wide range of drive and control variants. The removable control unit with large illuminated display offers a high level of ease of use. As control variants In addition to Pulse Control (including batch operation), can the Version via analog signal (0/4-20mA), PROFIBUS or CANopen be selected as an option in the ID code. In addition, the motor dosing pump can be equipped with relay modules (e.g. central fault message or 4-20 mA output) equipped become. The stroke length adjustment can be in the stroke adjustment range of 0-100% can be set manually in 1% steps and achieves a Reproducibility of dosing accuracy of +/- 2% in the range of 30 to 100% of the stroke length. (Observe the instructions in the documentation on this). The plastic housing protects against corrosion and enables protection class IP65. Total output range of the S3Cb series: 182-1,040 l/h, 12-4 bar (flow rate/pressure see offered pump type/identification code) Can be used for almost all liquid chemicals thanks to the available PVDF and stainless steel material variants. Our Sigma series are also available in certain versions with an FDA-compliant certificate or an EAC certificate deliverable. The “left conveyor unit” variant offers additional adjustment options for special installation situations. ID code: S3CBH040830PVTS130UA01000EN Series: S3CB - Sigma 3 control type version B Drive type: H - main drive Pump type: 04083 - 4 bar, 1040 l/h Dosing head material: PV - PVDF Seal material: T - PTFE seal Displacer material: S - multi-layer membrane opt. Anzeig Dosing head version: 1 - without vent, with valve Hydraulic connection: 3 - U-nut & E-part PVDF Version: 0 - with PM logo El. Power supply: U - 1ph, 100-240V, 50/60Hz, 420W Cable and plug: A - 2m Europe Relay function: 0 - without relay Control variant: 1 - Manual+Cont. +p.c+analog+DOS.pr Overpressure cut-off: 0 - without overpressure cut-off Control unit: 0 - HMI m.Click Wheel (0.5m cable) Access code: 0 - or access control Ü.-awake. dyn. Languages: EN - English Approval: 01 - CE Frequency: 50/60Hz Voltage: 100-240V Power: 420W Protection class: IP65 flow rate: 1040l/h Back pressure: 4bar |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for ProMinent - S3CBH040830PVTS130UA01000EN motor dosing pump number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Korea Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Mehrsch.Membr. S3_a d178x132 PTFE / EPDM Order number: 1029603
Multi-function valve MFV-DK
Sensor for measuring ozone in clear water
sensor OZE 3-mA-2ppm
pH sensor
gel-filled pH electrode with glass stem and PTFE ring diaphragm Typical applications: municipal and industrial waste water, drinking water, and Water, chemicals, paper making, food industry. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / Pressure: 0..80 degree C / 6 bar at least conductivity. 50 micro S / cm Installation length: 120 +/- 3mm
pH electrode
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH Sensor
Sensor
pH electrode
Sensor
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm
PH electrode Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH -Elektrode
Pneumatic dosing pump PNDb Series: PNDb Pneumados B - B Pump Version Pump type 1601 16 bar, 1 l / h, Conn. 6x4 Dosing head: SS stainless steel Seal material: T standard Membr./ PTFE sealing. Dosing head: 0 o.Entlüftung, o.Ventilfeder Hydraul. connection: 0 standard connection Design (logo): 0 with PM Logo Power outlet: 0 terminal G1 / 4, air pressure 6 bar Control Type / Anst: 0 single acting (Standard) Admission: 01 CE Air pressure: 6 BAR Flow rate: 1.0L / H
Absorption Basket Strainer
Absorption Basket Strainer
RH electrode
ORP sensor
ORP sensor
pH probe
Diaphragm Metering Pump max. 120 L/h @ max. 4 bar
Sigma 1 Base Type: S1Ba Sigma 1 base type Engine type: H Main power Pump type: 04120 4 bar, 120 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S S. membrane rupture indicator opti. Dosing head: 0 o.Überströmventil, o.Ventilf. Hydraulic Conn: 7 nights Mother &. S-spout PVDF Version: 0 With PM-Logo Electrical connection: S 3ph. 230 / 400V 50 / 60Hz (WBS) Motor version: 0 IP55 (Standard) ISO class F Stroke sensor: 0 No stroke sensor Auto Hublängeneins. 0 stroke length manually Admission: 01 CE Frequency: 50 / 60Hz Voltage: 230 / 400V Power: 0.09KW Protection: IP55 Flow rate: 120 / 144l / h Back pressure: 4 bar
Series: S1CB Sigma Control Type 1 Version B Engine type: H Main power Pump type: 04084 4 bar, 101 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S multi-layer membrane opt. Ad Dosing head: 0 o.Entlüftung, o.Ventilf. Hydraulic Conn: 0 Standard Version: 0 With PM-Logo El. Spannungsversorg: U 1ph, 100-240V, 50 / 60Hz, 110W Cables and connectors: A 2m Europe Relay function: 0 without relay Control variant: 1 Manual + Cont + p.c. + Analog + Dos.pr. Overpressure shutdown: 0 without overpressure shutdown Operating unit: S HMI (0.5m cable) Access Code: 1 m. Zugangskontr. Ü.-awake. dyn. Languages: English EN Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-240V Power: 110W Protection: IP65 Flow rate: 101l / h Back pressure: 4 bar