Buy Typ BMS 53 from Transfluid in Korea

Trans fluid turbo coupling Coupling comprising:  clutch drilled with D = Ø48 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT20, drilled and grooved, DIN 6885/1

Coupling: coupling, drilled with D = Ø48 mm G7 and Keyway according to DIN 6885/1 Angefl. Elastic coupling BT20, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø55 mm Viton seals-melting plug T = 140 ° C Weight 21,5 kg WITHOUT oil filling

hydraulic coupling

Trans fluid turbo coupling With:  coupling with conical sleeve, drilled with D = Ø60 mm without key  Angefl. Elastic coupling BT30, drilled and grooved, DIN 6885/1 maximum bore diameter Ø70 mm specify when ordering  Viton seals  melting plug T = 140 ° C  weight about 34 kg WITHOUT oil filling

Trans fluid turbo coupling Coupling comprising:  coupling with conical sleeve, drilled with D = Ø60 mm without key  Angefl. Elastic coupling BT30, drilled and genutetnach DIN 6885/1 maximum bore diameter Ø70 mm specify when ordering

 coupling with conical sleeve, drilled with D = Ø60 mm without key  Angefl. Elastic coupling BT30, drilled and grooved, DIN 6885/1 maximum bore diameter Ø70 mm specify when ordering    Viton seals  melting plug T = 140 ° C  weight about 34 kg WITHOUT oil filling

HYDRODYNAMIC JOINT

Trans fluid turbo coupling  driven side (transmission side) with conical sleeve, drilled with D = 60 mm, with a keyway according to DIN 6885/1  drive side (motor side) Angefl. Elastic coupling BT40, drilled with G = 65 mm H7 with a keyway according to DIN 6885/1  Viton seals  melting plug T = 140 ° C  weight about 50.3 kg WITHOUT oil filling

Trans fluid turbo coupling Type: 15 KRG 60 xxx Coupling comprising:  coupling with conical sleeve, drilled with D = Ø60 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT40, drilled and grooved, according to DIN 6885/1 maximum hole diameter Ø80 mm specify when ordering

Coupling comprising:  coupling with conical sleeve, drilled with D = Ø60 mm with keyway to DIN 6885/1  Angefl. Elastic coupling BT40, drilled and grooved, DIN 6885/1 maximum hole diameter Ø80 mm specify when ordering    Viton seals  melting plug T = 140 ° C  weight about 50.3 kg WITHOUT oil filling

Coupling: coupling with taper sleeve, bored with D = Ø65 mm without Keyway according to DIN 6885/1 Angefl. Elastic coupling BT40, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø80 mm Viton seals-melting plug T = 140 ° C Weight approx 50.3 kg WITHOUT oil filling

Transfluid Turbokupplung

Transfluid Turbokupplung

Coupling comprising:  with internal wheel  coupling with conical sleeve, drilled with D = Ø60 mm and Keyway to DIN 6885/1  with flexible coupling BT50, undrilled Melting plug T = 140 ° C  Viton seals WITHOUT oil filling

Coupling with:  clutch, drilled with D = Ø75 mm G7 and Keyway according to DIN 6885/1  Angefl. Elastic coupling BT50, drilled and grooved, according to DIN 6885/1 maximum bore diameter Ø90 mm Viton seals   fusible plug T = 140 ° C  Weight approx 77 kg WITHOUT oil filling

clutch

Coupling comprising:  input clutch with the conical sleeve, drilled with D = Ø55 mm and keyway according to DIN 6885/1  leaving Flanged elastic coupling BT50, drilled with G = Ø55 mm and keyway according to DIN 6885/1  Viton seals  melting plug T = 140 ° C  weight about 84 kg WITHOUT oil filling

turboclutch

Transfluid Turbokupplung

hydraulic coupling

Rubber Block

(Thrustor TF30 / 50 - NGO)

thrustor TF30/50 - LSM - features according to the attached catalogue No. 355GB

(thrustor TF30/50 - LSM - features according to the attached catalogue No. 355GB)